Versions Compared

Old Version 17

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 18

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Check Software Measurements

Info

  • Check the software measurements to make sure that images taken with the camera are displayed at the correct scale, so that art, mats and frame moulding will display proportionally correct.

  • Open the FrameShop software and click on Visualize.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
Tip

  • Default Settings:

  • See Admin > Defaults for the default settings for Loading Images.

  • See Admin > Editor for the default settings for the Camera Defaults.

  • See Admin > Editor for the default settings for the Wink Camera Defaults.

  • Place a measuring tape on the design table. 

  • Click the Take Picture button on the Images tab.

  • If there is more than one device available, select the desired camera from the dropdown control on the Camera Capture Screen.

  • A photo of the measuring tape is displayed.

  • Click the Set New Scale button.

  • Draw a box Horizontally along the Ruler; take as long of a measurement as possible as this improves the software's measurements.

  • A screen opens requesting the Width Measurement.

  • Enter the specific width that was measured within this box.

  • Click OK. 

Info

  • The Scale for the camera is now set.

Measure a Piece of Art

Info

  • Measure a piece of Art taken with the Camera to make sure that the Scale is set correctly, so that Art and Moulding will display proportionally correct.

  • Click the Take Picturebutton.

  • Position a piece of Art under the camera and center it in the field of view.

  • Click Take Picture.

  • Click on the Art Regions Tab.

  • Click Add New Art Region button.

  • Draw a selection box around the Art.

  • The dimensions of the image displays on the Selected Region width and height boxes.             

  • The dimensions of the image should be correct, within approximately 1/8 inches. If the dimensions are correct and the image still appears “square,” then the camera is Calibrated at this specific Fixed Zoom Point.

...