Versions Compared

Old Version 108

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 109

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

45 Degree Opening Cuts Wrong Depth When Using SKU

  • If the Blade Depth is cut Too Deep, Decrease the Depth Bias.

  • If the Blade Depth is cut Too Shallow, Increase the Depth Bias.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information:

  • See Depth Bias for information on setting the Depth Bias.

  • See Matboard Properties for information on assigning matboard SKUs to each layer of the design in Designer.

  • See Mat SKUs for information on assigning matboard SKUs to each layer of the design in Visualize.

  • See Frame SKUs for information on assigning Frame SKUs to each layer of the design in Visualize.

  • See Assign SKU to Layer for more information on Assigning a SKU to a Layer on the Cut Preview.

Tip

  • Default Settings:

  • See Admin > Subscription for the default settings for Subscribing to Vendors.

  • See Admin > Frames for the default settings for Frame Records for Vendors you are Subscribed to.

  • See Admin > Mats for the default settings for Mat Records for Vendors you are Subscribed to.

Expand
titleDepth Bias Definition

The Depth Bias is used to calculate the properBlade Depth when the SKUselected for the matboard contains the Matboard Thickness.

The formula is: [(Default Depth) - 10]

For example, if the normal Blade Depth for 4-ply is 11, then 11-10=1, so enter 1 for the Depth Bias.

See: Depth Bias

Expand
titleHow to Adjust the Depth Bias

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

DepthBiasBladeDepth70800.png

45 Degree Opening Does Not Pause for Blade Change

  • The Plunge Count controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information:

  • Adjust the Plunge Count in the Configuration Screen for each blade cartridge.

  • See Plunge Count Toggle to toggle on the Plunge Count on the Cut Preview.

Expand
titlePlunge Count Definition

The Plunge Count controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change /wiki/spaces/FrameShop8x/pages/1942508251.

See: Plunge Count Function

See: Plunge Count Value Configurations

...

45 Degree Opening has a Swoop

  • If the Opening has a Swoop, Increase the Rotation.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information:

  • See Rotation for adjusting for a Swoop or Flare in a Non-Oval.

  • See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval.

Expand
titleSwoop on Opening Definition

A Swoop in an Opening is where the corners Curve Inward toward the opening.

If the Opening has a Swoop, Increase the Rotation.

The Rotation controls for Swoops and Flares /wiki/spaces/FrameShop8x/pages/1942511158in Openings.

See: Rotation Configurations

Expand
titleHow to Adjust the Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

...