Versions Compared

Old Version 91

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 92

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Expand
titleBumps Oval Rotation General Definition
A Bump in an Oval Openingis a Lumpof material left behind where the cut started and ended.If the Oval Opening has a Bump, IncreasetheOval Rotation.

The Oval Rotation controls for Bumps or Feathers/wiki/spaces/FrameShop8x/pages/1942510997on an Oval Opening.

Image RemovedImage Removed

See: Oval Rotation Configurations

See: Oval Rotation for Openings Configurations

See: Oval Rotation for Drops Configurations

See: Oval Rotation for the Outside Configurations

See: Outside Oval Rotation for V-Grooves Configurations

See: Inside Oval Rotation for V-Grooves Configurations

Expand
titleHow to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image RemovedTroubleshootingFeather70800.pngImage RemovedTroubleshootingBump70800.pngImage Removed

Accessing the Troubleshooting Screen

TroubleshootingButton70800.pngImage Removed
Expand
titleIf the Troubleshooting Button is Grayed Out or Missing

The Troubleshooting button will be grayed out/hidden if:

  • There is more than one object in the design

  • No object at all

  • If you accessed the Configurations screen from the Main Screen

  • You are running a Save-Only license

Image Removed

  • The current object's Cartridge Type Tab and Bevel Type will be automatically selected and displayed.

  • Features not pertinent to the current design type will be grayed out.

Image Removed

Adjusting Non-Oval Objects

Info

  • The Troubleshooting screen displays the Flare and Swoop sections for Non-Oval Objects.

  • Select which part of the object to edit by clicking the Less Flare or Less Swoop buttons.

  • If the Object has a Swoop, select Less Swoop.

  • If the Object has a Flare, select Less Flare.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information:

  • See Rotation for adjusting for a Swoop or Flare in a Non-Oval.

Expand
titleSwoop General Definition

A Swoop in an object is where the corners Curve Inward toward the object.

If the Object has a Swoop, Increase the Rotation.

The Rotation controls for Swoops and Flares/wiki/spaces/FrameShop8x/pages/1942511158in Openings.

Image RemovedImage Removed

See: Swoop Rotation in Configurations

See: Swoop Rotation for Openings in Configurations

See: Swoop Rotation for Drops in Configurations

See: Swoop Rotation for Outside in Configurations

See: Swoop on Outside Rotation on V-Grooves Configurations

See: Swoop on Inside Rotation on V-Grooves Configurations

See: Swoop Rotation for Crease Configurations

Expand
titleFlare General Definition

A Flare in an object is where the corners Curve Away from the object.

If the Object has a Flare, Decrease the Rotation.

The Rotation controls for Swoops and Flares/wiki/spaces/FrameShop8x/pages/1942511158in Openings.

Image RemovedImage Removed

See: Flare Rotation in Configurations

See: Flare Rotation for Openings in Configurations

See: Flare Rotation for Drops in Configurations

See: Flare Rotation on Outside in Configurations

See: Flare on Outside Rotation on V-Grooves Configurations

See: Flare on Inside Rotation on V-Grooves Configurations

See: Flare Rotation on Crease Configurations

Expand
titleHow to Adjust the Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image RemovedImage RemovedImage Removed

Adjusting V-Grooves

Info

  • The Troubleshooting screen will display the Flare and Swoop sections for Non-Oval V-Grooves.

  • Select which part of the V-Groove to edit (Outside, Inside, Both) by clicking the desired radio-buttons between the Less Flare and Less Swoop sections.

  • Select which part of the object to edit by clicking the Less Flare or Less Swoop buttons.

  • If the Outside cut of the V-Groove has a Swoop, select Less Swoop.

  • If the Outside cut of the V-Groove has a Flare, select Less Flare.

  • If the Inside cut of the V-Groove has a Swoop, select Less Swoop.

  • If the Inside cut of the V-Groove has a Flare, select Less Flare.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information:

  • See Outside Rotation for adjusting a Swoop or Flare in the outside cut of a Non-Oval V-Groove.

  • See Inside Rotation for adjusting a Swoop or Flare in the inside cut of a Non-Oval V-Groove.

  • See Troubleshooting Utility for information on adjusting for a Swoop or Flare.

Expand
titleOutside V-Groove Swoop Definition

A Swoop in the Outside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.

If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

The Rotation on V-Grooves controls for Swoops and Flares/wiki/spaces/FrameShop8x/pages/1942511191on V-Grooves.

Image RemovedImage Removed

See: Swoop on Outside Rotation on V-Grooves Configurations

Expand
titleOutside V-Groove Flare Definition

A Flare on the Outside cut of the V-Groove is where the corners Curve Away from the V-Groove.

If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.

The Rotation on V-Grooves controls for Swoops and Flareson V-Grooves.Image RemovedImage Removed

See: Flare on Outside Rotation on V-Grooves Configurations

Expand
titleInside V-Groove Swoop Definition

A Swoop on the Inside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.

If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

The Inside Rotation on V-Grooves controls for Swoops and Flares/wiki/spaces/FrameShop8x/pages/1942511191on V-Grooves.

Image RemovedImage Removed

See: Swoop on Inside Rotation on V-Grooves Configurations

Expand
titleInside V-Groove Flare Definition

A Flare on the Inside cut of the V-Groove is where the corners Curve Away from the V-Groove.

If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.

The Rotation on V-Grooves controls for Swoops and Flareson V-Grooves.Image RemovedImage Removed

See: Flare on Inside Rotation on V-Grooves Configurations

Expand
titleHow to Adjust the Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image RemovedTroubleshootingSwoopVG70800.pngImage RemovedTroubleshootingFlareVG70800.pngImage Removed

Oval Objects

Info

  • The Troubleshooting screen will display the Feather and Bump sections for oval objects.

  • Select which part of the object to edit by clicking the Less Feather or Less Bump buttons.

  • If the Oval Opening has a Feather, select Less Feather.

  • If the Oval Opening has a Bump, select Less Bump.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information: See Oval Rotation for adjusting for a Feather or a Bump in an Oval.

Expand
titleFeather Oval Rotation General Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended on the Oval.

If the Oval Opening has a Feather, Decrease the Oval Rotation.

The Oval Rotation controls for Bumps or Feathers on an Oval.

Image RemovedImage Removed

See: Oval Rotation Configurations

See: Oval Rotation for Openings Configurations

See: Oval Rotation for Drops Configurations

See: Oval Rotation for the Outside Configurations

See: Outside Oval Rotation for V-Grooves Configurations

See: Inside Oval Rotation for V-Grooves Configurations

Troubleshooting Utility for Editing the Configurations

  • Use the Troubleshooting Utility to make quick edits to the Configurations.

Contents:

Child pages (Children Display)
alltrue
depth0
allChildrentrue
style
sortAndReverse
first0
TroubleshootingButton70800.pngImage Added

Adjusting Oval V-Grooves

Info

  • Select which part of the V-Groove to edit (Outside, Inside, Both) by clicking the desired radio-buttons between the Less Feather and Less Bump sections.

  • Select which part of the object to edit by clicking the Less Feather or Less Bump buttons.

  • If the Outside cut of the Oval V-Groove has a Feather, select Less Feather.

  • If the Outside cut of the Oval V-Groove cuts with a Bump, select Less Bump.

  • If the Inside cut of the Oval V-Groove has a Feather, select Less Feather.

  • If the Inside cut of theOval V-Groove cuts with a Bump, select Less Bump.

Panel
panelIconId1f603
panelIcon:smiley:
panelIconText😃
bgColor#FFFAE6

  • For Additional Information:

  • See Outside Oval Rotation for adjusting for a Feather or a Bump in the outside cut of an Oval V-Groove.

  • See Inside Oval Rotation for adjusting for a Feather or a Bump in the inside cut of an Oval V-Groove.

Expand
titleOutside Oval V-Groove Feather Definition

A Feather in the Outside cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended on the Outside cut of the Oval V-Groove.

If the Outside cut of the Oval V-Groove has a Feather, Increase the Outside Oval Rotation.

The Oval Rotation for V-Grooves controls for Feathersand Bumpson an Oval V-Groove.

See: Outside Oval Rotation for V-Grooves Configurations

Expand
titleOutside Oval V-Groove Bump Definition

A Bump in the Outside cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended on the Outside cut of the Oval V-Groove.

If the Outside cut of the Oval V-Groove cuts with a Bump, Decreasethe Outside Oval Rotation.

The Oval Rotation for V-Grooves controls for Feathersand Bumpson an Oval V-Groove.

See: Outside Oval Rotation for V-Grooves Configurations

Expand
titleInside Oval V-Groove Feather Definition

A Feather in the Inside cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended on the Inside Cut of the Oval V-Groove.

If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

The Oval Rotation for V-Grooves controls for Feathersand Bumpson an Oval V-Groove.

See: Inside Oval Rotation for V-Grooves Configurations

Expand
titleInside Oval V-Groove Bump Definition

A Bump in the Inside cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Inside Cut of the Oval V-Groove.

If the Inside cut of theOval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.

The Oval Rotation for V-Grooves controls for Feathersand Bumpson an Oval V-Groove.

See: Inside Oval Rotation for V-Grooves Configurations

Expand
titleHow to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

TroubleshootingFeatherVG70800.pngTroubleshootingBumpVG70800.png

...