Page Comparison

• Click on the CutArt to select it and click on the Properties Tab to edit it.

• Use CutArt Properties to edit the individual proprietary adjustments available for the CutArt.

• CutArt

• .

• For Additional InformationOptionally: Right-Click on the object CutArt and select Properties.

• Default Settings: See Admin > Editor for the default settings to Enforce Minimum Sizes for CutArt/LetterMat.

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

See: Add CutArt Function

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

See: Add CutArt Function

• Optionally, click the Computer tab to select the CutArt directly from your computer.

• Lock the size of the object to avoid adjusting it when dragging the mouse.

Use the Lock/Unlock feature to prevent the size of the opening from being changed by accidentally dragging the control corners with the mouse in Designer.

• The Original CutArt Width is displayed in the Min Width field.  

• The Original CutArt Height is displayed in the Min Height field.

• Cutting CutArts smaller than the Minimum Size is not recommended, and may give unexpected results.

• CutArts can be Debossed or Penned much smaller than they can be cut.

• Default Settings: See Admin > Editor for the default settings to Enforce Minimum Sizes for CutArt/LetterMat.

Min Height displays the Minimum Height that the selected CutArt or LetterMat has been tested to cut.

The CutArt/LetterMat can be Debossed or Penned at a much smaller size than it can be cut.

See: CutArt Properties

See: LetterMat Properties

• When a CutArtis placed, it is a single object.

• The individual elements cannot be moved separately until the CutArt is Exploded or it is brought into Trace to further edit.

• When a CutArtis placed, it is a single object.

• The individual elements cannot be moved separately until the CutArt is Exploded or brought into Trace to further edit.

• Explode the CutArt to move the separate elements of the CutArt individually.

See: CutArt Properties

See: Trace

The Trace utility is a Vector-Baseddrawing graphic program for editing/creating Vectors to either Cut or apply with a Non-Blade Tool on the CMC.

See: Vector Definition

See: Trace Manual

• For Additional information: Right-Click on the CutArt in the Design editor and select Explode CutArt.

• For Additional Information: Right-Click on the object and select Convert to CutArt to bring the design into Trace to further edit.