Page Comparison

• The Drive Belt lays Horizontally at the top and the bottom of the Board and runs through the Gantry.

• The Gantry is a spanning framework which attaches to the top and bottom of the Boardand moves horizontally across it along the Drive Belt.

• It is important that the Red Lines on the Drive Belt line up to the Red Lines on the Toothed Pulley on the Gantry, otherwise the Gantry would be crooked.

Connections:

• The Drive Belt lays Horizontally at the top and the bottom of the Board and runs through the Gantry.

Troubleshooting:

• If the vertical cuts are crooked, check to make sure the Red Lines on the Drive Belt line up to the Red Lines on the Toothed Pulley on the Gantry.

  • If the Red Lines do not line up, the Drive Belt needs to be realigned: Drive Belt Position Alignment.

    See

• The Drive Belt

  Position Alignment.

  is becoming frayed.

  • Order and replace the Drive Belt: Drive Belt Replacement