Page Comparison

• For Additional Information:

• See Depth Bias for information on setting the Depth Bias.

• See Matboard Properties for information on assigning matboard SKUs to each layer of the design in Designer.

• See Mat SKUs for information on assigning matboard SKUs to each layer of the design in Visualize.

• See Frame SKUs for information on assigning Frame SKUs to each layer of the design in Visualize.

• See Assign SKU to Layer for more information on Assigning a SKU to a Layer on the Cut Preview.

• Default Settings:

• See Admin > Subscription for the default settings for Subscribing to Vendors.

• See Admin > Frames for the default settings for Frame Records for Vendors you are Subscribed to.

• See Admin > Mats for the default settings for Mat Records for Vendors you are Subscribed to.

The Depth Bias is used to calculate the properBlade Depth when the SKUselected for the matboard contains the Matboard Thickness.

The formula is: [(Default Depth) - 10]

For example, if the normal Blade Depth for 4-ply is 11, then 11-10=1, so enter 1 for the Depth Bias.

See: Depth Bias Function