Versions Compared

Old Version 17

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Change to the 45 Plus Degree Blade Cartridge

Info

  • The 45 Degree Plus black metal cartridge 45°+ Black Metal Blade Cartridge* is designed to cut 45° bevels on thicker matboard, such as 8-ply matboard.

  • The 45°+ Blade Cartridge is labeled 45°(plus) + on the end.

  • Older models may have yellow plastic cartridge.

    Note:

    Notes:

    • Your hardware may look different than the model pictured, but the process is still the same.

    • The 45°+ Blade Cartridge support Blade Depths above 16.

    • *Older systems may have a 45°+ Yellow Plastic Blade Cartridge. 

Image RemovedImage Added

  • Push the blade cartridge Blade Cartridge release lever down to eject the blade cartridgeBlade Cartridge.

Image RemovedImage Added

  • Insert the new cartridge Cartridge into the Head with the blade Blade facing toward the board Board and the notch on the back of the cartridge Cartridge facing the Head.

  • It should click into place.

    • It can only be inserted one way.

Image RemovedImage Added