changes.mady.by.user dani.simmonds
Saved on Apr 26, 2024
Saved on May 14, 2024
...
The Non-Blade Tool leaves a Dot where it plunges, unselect Plunge.
The Non-Blade Tool takes Too Long to apply, select Plunge.
For Additional Information: See Plunge (Tool Specific) for information on adjusting the Plunging of the Non-Blade Tool in the corners.
The Plunge function controls whether to Plunge/Unplunge between the Line/Arc Segments of an object when applying a Non-Blade Tool.
The Non-Blade Tool leaves a Dot where it plunges, select Unplunge.
This is different from the Plunge Count which controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.
See: Plunge for Deboss.
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.
For Additional Information:
See Troubleshooting Utility.
See Oval Rotation for adjusting for a Feather or a Bump in an Oval.
See Circle/Oval Rotation Utility to adjust for a Feather or Bump in an Oval.
See Rotation for adjusting for a Swoop or Flare in a Non-Oval.
See Horizontal Home which defines the global Horizontal placement of objects cut with the Blade Cartridges.
See Vertical Home which defines the global Vertical placement of objects cut with the Blade Cartridges.
See Opening Adjustment for information on adjusting the object’s size.
The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure.
