changes.mady.by.user dani.simmonds
Saved on Apr 26, 2024
Saved on May 14, 2024
If the V-Groove is cut Too Large, Decrease the Opening Adjustment.
If the V-Groove is cut Too Small, Increase the Opening Adjustment.
For Additional Information: See Troubleshooting Utility for information on adjusting the object’s size.
Select desired Cartridge Tab.
Select the desired Bevel Type from Current Bevel Type.
Edit the desired Configuration field.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
First Cut: Cuts the Interior cut into the Fallout Clockwise.
Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.
...
