Versions Compared

Version Old Version 16 New Version 17
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Check Software Measurements

Info

  • Check the software measurements to make sure that images taken with the camera are displayed at the correct scale, so that art, mats and frame moulding will display proportionally correct.

  • Open the FrameShop software and click on Visualize.

Image Removed

  • Place a measuring tape on the design table. 

  • Click the Take Picture button on the Images tab.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
Tip

  • Default Settings:

  • See Admin > Defaults for the default settings for Loading Images.

  • See Admin > Editor for the default settings for the Camera Defaults.

  • See Admin > Editor for the default settings for the Wink Camera Defaults.

Image Added

  • Place a measuring tape on the design table. 

  • Click the Take Picture button on the Images tab.

  • If there is more than one device available, select the desired camera from the dropdown control on the Camera Capture Screen.

  • A photo of the measuring tape is displayed.

  • Click the Set New Scale button.

  • Draw a box Horizontally along the Ruler; take as long of a measurement as possible as this improves the software's measurements.

  • A screen opens requesting the Width Measurement.

  • Enter the specific width that was measured within this box.

  • Click OK. 

Info

  • The Scale for the camera is now set.

...