Page Comparison

Align the Head

Click the Align the Head button to Align the Head into the cutting position and power up the motors in preparation of cutting a mat.

Panel

For Additional Information: See the Disengage button to cut the power to the motors of the cutting head if the Head is Aligned.

Info
Aligning the Head will only get the machine ready to cut, but not actually cut. You will need to click the Cut Button to cut the design.

If you click the Align the Head button, the head will align and remain so until another command is given.
If you click the Cut button when the motors are disengaged, it will prompt you to Align the Head. After the Head is Aligned, itwill then Cut the mat.
If you click the Cut button when the motors are already engaged, it will begin cutting the mat.