Versions Compared

Old Version 28

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 29

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
:note

Contents:

bgColor

Tool Configs Section

Info

  • The Tool Configs on the Configurations Screen displays the global settings for the bevel cartridge tabs. 

Image Removed

Horizontal 

Panel
panelIconIdatlassian-note
panelIcon
Child pages (Children Display)
#B3F5FF

  • If the Opening is cut Too Far Left Horizontally, Increase the Horizontal Home.

  • If the Opening is cut Too Far Right Horizontally, Decrease the Horizontal Home.

Expand
titleHorizontal Home General Definition
The Horizontal Home defines the global Horizontalplacement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Left Horizontally, Increase the Horizontal Home.

If the Opening is cut Too Far Right Horizontally, Decrease the Horizontal Home.

Image RemovedImage Removed

See: Horizontal Home for Openings Configurations

See: Horizontal Home for V-Grooves Configurations

Image RemovedImage Removed

Vertical 

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Opening is cut Too Far Up Vertically, Decrease the Vertical Home.

  • If the Opening is cut Too Far Down Vertically, Increase the Vertical Home.

Expand
titleVertical Home General Definition

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Up Vertically, Decrease the Vertical Home.

If the Opening is cut Too Far Down Vertically, Increase the Vertical Home.

Image RemovedImage Removed

See: Vertical Home for Openings Configurations

See: Vertical Home for V-Grooves Configurations

Image RemovedImage Removed

Depth Bias 

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Blade Depth is cut Too Deep, Decrease the Depth Bias.

  • If the Blade Depth is cut Too Shallow, Increase the Depth Bias.

Expand
titleDepth Bias Definition
The Depth Bias is used to calculate the properBlade Depth when the SKUselected for the matboard contains the Matboard Thickness.

If the Blade Depth is cut Too Deep, Decrease the Depth Bias.

If the Blade Depth is cut Too Shallow, Increase the Depth Bias.

The formula is: [(Default Depth) - 10]

For example, if the normal Blade Depth for 4-ply is 11, then 11-10=1, so enter 1 for the Depth Bias.

Image Removed

See: Depth Bias

Image Removed

Plunge Count 

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If it doesn’t prompt for a Blade Change during the cut, enter the Plunge Count value and select Plunge Count on the Cut Preview.

    If you don’t want it to prompt for a Blade Change during the cut, unselect Plunge Count on the Cut Preview.

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  1. Adjust the Plunge Count in the Configuration Screen.

  2. Toggle the Plunge Count to On in the Cut Preview.

  3. See Plunge Count for additional information.

Expand
titlePlunge Count Definition

The Plunge Count controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

Image Removed

If it doesn’t prompt for a Blade Change during the cut, enter the Plunge Count value and select Plunge Count on the Cut Preview.

If you don’t want it to prompt for a Blade Change during the cut, unselect Plunge Count on the Cut Preview.

See: Plunge Count Function

See: Plunge Count Value Configurations

Image Removed

Circle/Oval Rotation Button

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Oval Opening has a Feather, Decrease the Oval Rotation.

    • If the Oval Opening has a Bump, IncreasetheOval Rotation.
    Expand
    titleFeather Oval Rotation General Definition

    A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended on the Oval.

    If the Oval Opening has a Feather, Decrease the Oval Rotation.

    The Oval Rotation controls for Bumps or Feathers on an Oval.

    Image RemovedImage Removed

    See: Oval Rotation Configurations

    See: Oval Rotation for Openings Configurations

    See: Oval Rotation for Drops Configurations

    See: Oval Rotation for the Outside Configurations

    See: Outside Oval Rotation for V-Grooves Configurations

    See: Inside Oval Rotation for V-Grooves Configurations

    Expand
    titleBumps Oval Rotation General Definition
    A Bump in an Oval Openingis a Lumpof material left behind where the cut started and ended.If the Oval Opening has a Bump, IncreasetheOval Rotation.The Oval Rotation controls for Bumps or Featherson an Oval Opening.Image RemovedImage Removed

    See: Oval Rotation Configurations

    See: Oval Rotation for Openings Configurations

    See: Oval Rotation for Drops Configurations

    See: Oval Rotation for the Outside Configurations

    See: Outside Oval Rotation for V-Grooves Configurations

    See: Inside Oval Rotation for V-Grooves Configurations

    Image Removed
    alltrue
    depth0
    allChildrentrue
    style
    sortAndReverse
    first0
    Image Added