Page Comparison

Oval Rotation Definitions

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

A Feather in an Oval V-Groove is a Fringe of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

If the Outside Oval V-Groove cuts with a Feather, Increase the Outside Oval Rotation.

A Bump in an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

If the Outside Oval V-Groove cuts with a Bump, Decrease the Outside Oval Rotation.

A Feather in an Oval V-Groove is a Fringe of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

If the Inside Oval V-Groove cuts with a Feather, Decrease the Inside Oval Rotation.

A Bump in an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

If the Inside Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.

Image Removed

Image Removed

Image Removed

Oval Rotation on Openings

Problem:

Resolution:

Oval Opening has a Bump:

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

Image Removed

Oval Rotation on Drops

Problem:

Resolution:

Oval Drops has a Bump:

Oval Rotation on Openings

Expand
title Feather in Oval Opening Definition
A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended on the Oval. If the Oval Opening has a Feather, Decrease the Oval Rotation. The Oval Rotation Rotation controls for Bumps or Feathers on an Oval Opening.If the Oval Opening cuts with a Feather, Decrease the Oval Rotation. Image AddedImage Added See: Oval Rotation for Openings Configurations

Expand
title Bumps in Oval Opening Definition
A Bump in an Oval Openingis a Lumpof material left behind where the cut started and endedand ended. If the Oval Opening has a Bump, Increasethe Oval Rotation. The Oval Rotation Rotation controls for Bumps or Featherson an Oval Opening.If the Oval Opening cuts with a Bump, Increase theOval Rotation. Image AddedImage Added See: Oval Rotation for Openings Configurations

Image Modified

Image Added

Oval Rotation

Problem:

on Drops

Expand
title Feather Feathers in Oval Drop Definition
A Feather in an Oval Opening Drop is a Fringe of material left behind where the cut started and endedstarted and ended on the Oval. If the Oval Drop has a Feather, Decrease the Oval Rotation. The Oval Rotation Rotation controls for Bumps or Featherson an Oval Opening.If the Oval Opening cuts with a Feather, Decrease the Oval Rotation. Image AddedImage Added See: Oval Rotation for Drops Configurations

Expand
title Bumps Bump in Oval Drop Definition
A Bump in an Oval Opening Dropis a Lumpof material left behind where the cut started and ended. If the Oval Drop has a Bump, Increasethe Oval Rotation. The Oval Rotation Rotation controls for Bumps or Featherson an Oval Opening.If the Oval Opening cuts with a Bump, Increase theOval Rotation. Image AddedImage Added See: Oval Rotation for Drops Configurations

Image Added

Image Modified

Oval Rotation on

Problem:

Outside

Panel
panelIconId atlassian-note panelIcon :note: bgColor #B3F5FF
Outside Oval V-Groove If the Oval Outside has a Feather:, Decrease the Oval Rotation. If the Oval Outside has a Bump, Increasethe Outside Oval Rotation.

A Feather in an Oval V-Groove is a Fringe

Panelexpand
panelIconId atlassian-note panelIcon :note: bgColor #B3F5FF
Outside Oval V-Groove has a Bump: Decrease the Outside Oval Rotation.
Expand
title Outside V-Groove Feather Definition
title Feathers in the Oval Outside Definition
A Feather in an Oval Outside is a Fringe of material left behind where the cut started and ended on the Oval. If the Oval Outside has a Feather, Decrease the Oval Rotation. The Oval Rotation controls for Bumps or Featherson an Oval. Image AddedImage Added See: Oval Rotation for the Outside Configurations

A Bump in an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

The Oval Rotation for V-Grooves controls for Bumpsor Featherson an Oval V-Groove.

If the Outside Oval V-Groove cuts with a Bump, Decrease the Outside Oval Rotation.

Expand
title Bumps in the Oval Outside Definition
A Bump in an Oval Outsideis a Lumpof material left behind where the cut started and ended on either . If the Outside or Inside Cut of the V-Groove.The Oval Rotation for V-Grooves controls for Oval Outside has a Bump, Increasethe Oval Rotation. The Oval Rotation controls for Bumps or Featherson an Oval V-Groove. If the Outside Oval V-Groove cuts with a Feather, Increase the Outside Oval Rotation.
Expand
title Outside V-Groove Bump Definition

Expand
title How to Adjust the Oval Rotation
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.

Image Removed

Problem:

Resolution for Inside Oval V-Groove Cut:

Panel
panelIconId atlassian-note panelIcon :note: bgColor #B3F5FF
Inside Opening. Image AddedImage Added See: Oval Rotation for the Outside Configurations

Image Added

Image Added

Outside Oval Rotation on Oval V-Grooves

Expand
title Outside Oval V-Groove Feather Definition
A Feather in the Outside cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended on the Outside cut of the Oval V-Groove. If the Outside cut of the Oval V-Groove has a Feather : Decrease the Inside Oval Rotation.
Panel
panelIconId atlassian-note panelIcon :note: bgColor #B3F5FF
Inside Oval V-Groove has a Bump: Increase the Inside Oval Rotation. , Increase the Outside Oval Rotation. The Oval Rotation for V-Grooves controls for Bumps or Featherson an Oval V-Groove. Image AddedImage Added See: Outside Oval Rotation for V-Grooves Configurations

A Bump in an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

If the Inside Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.

Image Removed

See Also: Troubleshooting Utility for Ovals

Problem:

Resolution:

Image AddedImage Added See: Outside Oval Rotation for V-Grooves Configurations Expand title How to Adjust the Oval Rotation When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.

Image AddedImage Added

Inside Oval Rotation on Oval V-Grooves Panel panelIconId atlassian-note panelIcon :note: bgColor #B3F5FF If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation. If the Inside cut of theOval V-Groove has a Bump, Increase the Inside Oval Rotation. Expand title Inside Oval V-Groove Feather Definition A Feather in the Inside cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended on the Inside Cut of the Oval V-Groove. If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation. The Oval Rotation for V-Grooves controls for Bumps or Featherson an Oval V-Groove. Image AddedImage Added See: Inside Oval Rotation for V-Grooves Configurations Expand title Inside Oval V-Groove Bump Definition A Bump in the Inside cut of an Oval V-Groove is a

If the Outside Oval V-Groove cuts with a Feather, Increase the Outside Oval Rotation.

If the Inside Oval V-Groove cuts with a Feather, Decrease the Inside Oval Rotation.

A Bump in an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

Image AddedImage Added See: Inside Oval Rotation for V-Grooves Configurations Expand title How to Adjust the Oval Rotation When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.

Image AddedImage Added