Versions Compared

Old Version 25

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 26

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

90 Degree Cartridge Configurations

Info

  • The 90 Degree Cartridge cuts into the matboard at 90° and leaves no bevel. 

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a Blade, Deboss Stylus, Pen or other application tool.

Select the 90 Degree Cartridge Bevel Type

Expand
titleHow to Select the
90° Cartridge tab.
Bevel Type to Edit

Select desired Cartridge Tab. 

Select the

desired 

desired Bevel Type

 from the 

from Current Bevel Type

 dropdown control

.

Select the cut type from the list below.

Edit the desired Configuration field.

Image Added
Expand
titleBevel Type Definition

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

Image Removed

90 Degree Opening Configurations

The 90 Degree Opening includes the following bevel types: cuts a 90° bevel into the matboard opening.

Tip

  • Normal Bevel

  • Normal Bevel-Front of Mat

90 Degree Drop Configurations

The 90 Degree Drop includes the following bevel types: cuts a 90° bevel into the matboard drop.

Tip

  • Normal Drop

  • Normal Drop-Front of Mat

90 Degree Outside Configurations

The 90 Degree Outside includes the following bevel types: cuts a 90° bevel into the matboard outside.

Tip

  • Outside

  • Outside-Front of Mat

Troubleshooting Button

Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

Expand
titleTroubleshooting Button Definition

The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure.