Versions Compared

Old Version 23

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 24

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

45 Degree Plus Cartridge Configurations

Info

  • The 45 Degree Plus Cartridge cuts a 45° bevel into thicker matboard such as 8-ply. 

  • Older systems may have a yellow plastic 45°+ Cartridge.

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a Blade, Deboss Stylus, Pen or other application tool.

Select the 45 Degree Plus Cartridge Bevel Type

  • Select the 45°+ Tab on the Configurations screen.

  • Select the desired Bevel Type from the Current Bevel Type dropdown control.

  • Select the cut type from the list below.

Expand
titleBevel Type Definition

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

...

Troubleshooting Button

Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

Expand
titleTroubleshooting Button Definition

The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure.