Blade Depth ButtonUse the Blade Depth screen to select the Blade Depth for the current layer. | |
|---|---|
Blade Depth Click the Blade Depth Button to open the Blade Depth screen which allows the user to set the software blade depth for the current design. |  |
...
Opening Value | |
|---|---|
Select the desired Opening Blade Depth value* in the Opening field. If desired, enter notes in the Label field for future references for this particular blade depth. *This value corresponds to the number on the Blade Depth dial. |  |
V-Groove Value | |
|---|---|
Select the desired V-Groove Blade Depth value* in the V-Grooves field. If desired, enter notes in the Label field for future references for this particular blade depth. *This value corresponds to the number on the Blade Depth dial. |  |
Set As Default | |
|---|---|
Click Click the Set As Default button to set the current Blade Depth value as the Default Blade Depth for the associated Opening or V-Groove field. |  |
Set the Default for the Blade Depth | |
|---|---|
The default setting for the Blade Depth can be set in the Admin > Cutting section. This also sets the values for the preset Blade Depth Quick Select Entries. |  |
Cartridge and Blade Depth Prompt for CMC Z1 | |
|---|---|
After selecting the desired Blade Depth for the current layer and Aligning the Head if necessary, Click Cut to cut the mat. The user will be prompted to confirm the current Cartridge and Blade Depth and change the hardware to match. If the current layer uses a different Cartridge or Blade Depth than the last mat cut, the user will be prompted to change the Cartridge and/or the Blade Depth. |  |
Replace the current Cartridge with the one requested on the Cartridge and Blade Depth Prompt. |  |
Change the Blade Depth Value on the screen by clicking on the -/+ buttons to decrease/increase the Blade Depth Value. The Z1 will automatically adjust the physical Blade Depth of the CMC to this number when you click Continue. Click Continue to cut. |  |
...