Page Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Info
Note: Not all cartridges are available for all CMC models.

Rotation on V-Grooves Definition

Adjusting the V-Groove Rotation

Tip
To adjust, click plus/minus on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.

Expand

title	Outside Rotation for V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the outside cut Outside Cut of the Non-Oval V-Grooves.

Adjusting the V-Groove Rotation

Tip
To adjust, click plus/minus on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved

Expand

title	Outside Swoop Definition

A Swoopin the Outside Cut of a Non-Oval V-Groove is where the corners Curve Inward toward the opening on the Outside Cut of the V-Groove.

Expand

title	Outside Flare Definition

A Flare in the Outside Cut of a Non-Oval V-Groove is where the corners Curve Away from the opening on the Outside Cut of the V-Groove.

V-Groove Cutting Direction

Tip

First Cut of V-Groove:

Cuts the Interior V-Groove Line.
Cuts into fallout, not the matboard.
Cuts clockwise.
This uses the Inside Rotation.

Tip

Second Cut of V-Groove:

Cuts the Exterior V-Groove Line.
Cuts into matboard, not the fallout.
Cuts counter-clockwise.
This uses the Outside Rotation.

V-Groove Outside has a Swoop

Problem:

The Outside cut of the nonNon-oval Oval V-Groove has Swoops.

Resolution:

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

Expand

title	Outside Rotation for V-Grooves Swoop Definition

The Outside Rotation on A Swoopin the Outside Cut of a Non-Oval V-Grooves controls for Swoops and Flares in the outside cut of the Non-Oval V-Grooves.

Resolution:

Decrease the Outside Rotation

Groove is where the corners Curve Inward toward the opening on the Outside Cut of the V-Groove.

V-Groove Outside has a Flare

Problem:

The Outside cut of the nonNon-ovalOval V-Groove has Flares.

Resolution:

If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

Expand

title	Outside Rotation for V-Grooves Flare Definition

The Outside Rotation on A Flare in the Outside Cut of a Non-Oval V-Grooves controls for Swoops and Flares in the outside cut of the Non-Oval V-Grooves.

Resolution:

Increase the Outside Rotation.

Groove is where the corners Curve Away from the opening on the Outside Cut of the V-Groove.

Problem:

The Outside Non-Oval V-Groove cuts with a Swoop or Flare.

Resolution:

Use the Troubleshooting Configurations to fine-tune for Swoop/Flare in a Non-Oval V-Groove.

Expand

title	Outside Rotation for V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the outside cut Outside Cut of the Non-Oval V-Grooves.

Resolution:

Use the Troubleshooting Configurations to fine-tune for Swoop/Flare in a Non-Oval

Expand

title	Outside Swoop Definition

A Swoopin the Outside Cut of a Non-Oval V-Groove is where the corners Curve Inward toward the opening on the Outside Cut of the V-Groove.

Expand

title	Outside Flare Definition

A Flare in the Outside Cut of a Non-Oval V-Groove is where the corners Curve Away from the opening on the Outside Cut of the V-Groove.

Versions Compared

Old Version 50

New Version 51

Key

Cartridges Involved

Rotation on V-Grooves Definition

V-Groove Cutting Direction

V-Groove Outside has a Swoop

Problem:

Resolution:

Resolution:

V-Groove Outside has a Flare

Problem:

Resolution:

Resolution:

See Also: Troubleshooting Utility for Non-Oval V-Grooves

Problem:

Resolution:

Resolution: