Page Comparison

...

45 Degree Plus Cartridge Configurations

Info
The 45 Degree Plus Cartridge cuts a 45° bevel into thicker matboard such as 8-ply. Older systems may have a yellow plastic 45°+ Cartridge.

Image Modified

Select the 45 Degree Plus Cartridge Bevel Type
Select the 45°+ Tab on the Configurations screen. Select the desired Bevel Type from the Current Bevel Type dropdown control. Select the cut type from the list below.

The 45 Degree Plus Openingincludes the following bevel types:

Tip
Normal Bevel Reverse Bevel Normal Bevel-Front of Mat Reverse Bevel-Front of Mat

Image Modified

The 45 Degree Plus Drop includes the following bevel types:

Tip
Normal Drop Reverse Drop Normal Drop-Front of Mat Reverse Drop-Front of Mat

Image Modified

The 45 Degree Plus Outside includes the following bevel types:

Tip
Outside Outside-Front of Mat

Image Modified

The 45 Degree Plus V-Groove includes the following bevel types:

Tip
V-Groove

Image Modified

Troubleshooting Button
Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.