Versions Compared

Old Version 27

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 28

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

...

Select the Deboss Wide Cartridge Type

  • Select the Deboss Tab on the Configurations screen.  

  • Select the Wide-Blue cartridge from the Cartridge dropdown control.

Tip

  • Deboss Wide

Select the Area of Concern for Wide Deboss Below:

  • Be sure to select the Deboss Wide from the Current Bevel Type dropdown control.

Deboss-Wide is Applied to the Wrong Place Horizontally

Problem:

  • The Deboss-Wide is Applied to the Wrong Place Horizontally.

Expand
titleHorizontal Adjustment Definition

The Horizontal Adjustment controls where the Deboss is placed Horizontally.

Resolution:

  • If too far left, increase the Horizontal Adjustment.

  • If too far right, decrease the Horizontal Adjustment.

  • See Horizontal Adjustment for additional information.

Deboss-Wide is Applied to the Wrong Place Vertically 

Problem:

  • The Deboss-Wide is Applied to the Wrong Place Vertically.

Expand
titleVertical Adjustment Definition

The Vertical Adjustment controls specifically where the Deboss is placed Vertically.

Resolution:

  • If too far down, increase the Vertical Adjustment.

  • If too far up, decrease the Vertical Adjustment.

  • See Vertical Adjustment for additional information.

Deboss-Wide is the Wrong Size

Problem:

  • The Deboss-Wide is the Wrong Size.

Expand
titleOpening Adjustment Definition

The Opening Adjustment controls the size of the opening.

Resolution:

  • If cut too small, increase the Opening Adjustment.

  • If cut too large, decrease the Opening Adjustment.

  • See Opening Adjustment for additional information.

Deboss-Wide Applied at the Wrong Depth

Problem:

  • The Deboss-Wide is Applied at the Wrong Depth.

Expand
titleDepth Setting Definition

The Depth Setting calculates the proper Blade Depth when a SKU is selected for the matboard.

Resolution:

  • Cut too shallow, increase the Depth Setting.

  • Cut too deep, decrease the Depth Setting.

  • See Depth Setting for additional information.

Deboss-Wide Cartridge Tears the Mat 

Problem:

  • Deboss-Wide Cartridge Tears the Mat.

Expand
titleCorner Pause Definition

The Corner Pause controls the amount of time, in milliseconds, to pause the application of the non-blade tools in the corners to avoid tearing the mat.

Resolution:

  • Increase the Corner Pause.

  • See Corner Pause for additional information.

Deboss-Wide Lines are too Long

Problem:

  • The Deboss-Wide Lines are too Long.

Expand
titleOvershoot Definition

The Overshootcontrols how far past each segment the non-blade tool is applied.

Resolution:

  • Decrease the Overshoot.

  • See Overshoot for additional information.

Deboss-Wide Lines are too Short 

Problem:

  • The Deboss-Wide Lines are too Short.

Expand
titleOvershoot Definition

The Overshootcontrols how far past each segment the non-blade tool is applied.

Resolution:

  • Increase the Overshoot.

  • See Overshoot for additional information.

Deboss-Wide Set to Plunge Between Segments

Problem:

  • The Deboss-Wide Set to Plunge Between Segments.

Expand
titlePlunge Definition

The Plungecontrols whether to Plunge/Unplunge between segments of an object when applying a non-blade tool.

Resolution:

  • Select Plunge to plunge the Deboss between Segments.

  • See Plunge for additional information.

...