Versions Compared

Old Version 11

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 12

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Deboss Wide Cartridge

The Blue Deboss Wide Cartridge presses a wide stylus into the matboard to create a subtle design.

Select the Deboss Wide Cartridge Type

Select the Deboss Tab on the Configurations screen.  

Select the Wide-Blue cartridge from the Cartridge dropdown control.

Select the Area of Concern for Wide Deboss Below:

Be sure to select the Deboss Wide from the Current Bevel Type dropdown control.

Deboss-Wide is Applied to the Wrong Place Horizontally

Deboss-Wide is Applied to the Wrong Place Vertically 

  • This is viewed from the front of the mat.

  • Select this topic to adjust the Vertical Adjustment.

Deboss-Wide is the Wrong Size

  • This is viewed from the front of the mat.

  • Select this topic to adjust the Opening Adjustment.

Deboss-Wide Applied at the Wrong Depth

Deboss-Wide Cartridge Tears the Mat 

Deboss-Wide Lines are too Long

  • This is viewed from the front of the mat.

  • Select this topic to adjust the Overshoot.

Deboss-Wide Lines are too Short 

  • This is viewed from the front of the mat.

  • Select this topic to adjust the Overshoot.

Deboss-Wide Set to Plunge Between Segments

  • Select this topic to adjust the Plunge between segments.

Troubleshooting Button 

...