Page Comparison

Load the desired CutArt into the FrameShop Design Editor.

Click to select the CutArt.

Click on the Properties tab.

Click on the rotation control point located on the right side of the object.

Hold and drag the control point up or down with the mouse to rotate the object.

The number of degrees is displayed in a mini pop-up screen next to the rotation control point.

Release the mouse when the object is rotated to the desired position.

The number of degrees that the currently selected object is rotated is displayed on the Rotation field on the Properties Tab and on the Advanced Tab.

After rotating it, you can either save the project, or save the rotated CutArt as a new CutArt (instructions listed below).

For other hints on rotating in the Design editor, see Design Rotation.

Load the desired CutArt into the FrameShop Design Editor.

Click to select the CutArt.

Click on the Advanced Tab. 

Use the Rotation slider or manually type in a guesstimate rotation value in the Rotation field to rotate the CutArt. 

Adjust accordingly until the desired outcome is achieved.

For other hints on rotating in the FrameShop Design editorEditor, see Design Rotation.

From here you can either Save the Project, or save the rotated CutArt as a new CutArt (listed below).