Creating a Jersey with Template Shapes | |
|---|---|
Jerseys come in a large variety of shapes and sizes, and depending upon how they're folded, the jersey design can become even more varied. You can easily create a custom opening for a jersey with the minimum amount of effort. Start by laying out the openings that will make up the segments of the design. We want them to overlap a little so that we can merge them. We're going to design half of the jersey then mirror it in Trace to create the other half of the jersey. By going through these steps, you can customize the design for the particular jersey you are working on. These steps can be used to make other shapes as well, so it is not limited to just making jerseys. |  |
This also describes how to make an alternative design. |  |
Jersey Neckline | |
|---|---|
Place a 17 x 17 one layer #402: Classic template on the FrameShop Design Editor. Click on the Parameters tab and change the Radius to 6. This controls the arc of the neckline. Enter 45 in the Rotation field. We now have the neckline. Move it to the top of the mat. |  |
...
Comparison | |
|---|---|
You can see how much we changed the design when you compare it to what we started with. | |
Jersey Design:  |
|
Alternative Jersey Design:  |
|
