This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Interior Backup on Openings

The Interior Backup is where the blade backs up before initially plunging into the fallout of the opening, such as when cutting a French Stair. 

Interior Cuts cut into the fallout, not the matboard. 

Current Bevel Type

Make sure to select the desired Cartridge Tab and then the bevel type you want to edit from the Current Bevel Type dropdown control before making adjustments. Select Front of Mat if it is being cut from the front of the mat.

Black Arrow

The Interior Backup is displayed on the Configuration Map as a black arrow. 

Configuration Map

Check against the Configuration Map of the Bevel Type you are cutting to determine specifically which cuts are the Interior Backups.

Interior Cuts, such as on French Stairs, cut into the fallout, not the matboard.  

Opening Interior Backup Too Short 

If the Interior Backup plunges the blade too late, it makes the interior backup too short.

Increase the Interior Backup.

Opening Interior Backup Too Long

If the Interior Backup plunges the blade too soon, it makes the interior backup too long.

Decrease the Interior Backup.

Opening Exterior Backups

For Backups where the blade plunges into the matboard instead of the fallout, see Exterior Backup.

  • No labels