">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Tool Configs Section

  • The Tool Configs on the Configurations Screen displays the global settings for the bevel cartridge tabs. 

Horizontal 

Problem:

  • The opening/object is cut in the wrong place Horizontally.

Resolution:

 Horizontal Home Definition

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

Vertical 

Problem:

  • The opening/object is cut in the wrong place Vertically.

Resolution:

 Vertical Home Definition

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

Depth Bias 

Problem:

  • The opening/object is cut at the wrong depth when a SKU has been selected.

Resolution:

  • The Blade Depth is too Deep, Decrease the Depth Bias.

  • The Blade Depth is too Shallow, Increase the Depth Bias.

  • See Depth Bias for additional information.

 Depth Bias Definition

The Depth Bias is used to calculate the proper Blade Depth when the SKU selected for the matboard contains the Matboard Thickness.

Plunge Count 

Problem:

  • The opening/object does not pause for a blade change while cutting.

Resolution:

 Plunge Count Definition

The Plunge Count controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

Circle/Oval Rotation Button

Problem:

  • The Circle/Oval has a Feather/Bump.

Resolution:

 Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

 Bump Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

  • No labels