This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Current »

Close Tool

The Close button will close the remaining open segment of an object to complete the circuit.

This is usually the last step after Joining the segments.

Closing an Object

Click on the object that has all but the last segment connected. 

Select the Close button.

The object should now be fully enclosed.

Auto Join Segments

Alternatively, use Edit>Auto Join Segments to auto join all segments of the design.

All the adjacent segments will be joined together. 

Auto Join Segments Button

Optionally, use the Auto Join Segments button. 

This will automatically join adjacent segments together.

  • No labels