This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Rotation on Non-Oval V-Groove

The Rotation field controls how much the foot block will rotate before cutting. Adjust the Rotation if you are getting Swoops or Flares in the corners on a non-oval V-Groove.

Select the Portion of the Non-Oval V-Groove you wish to Edit:

V-Groove Outside Rotation

The Outside Rotation field controls how much the foot block will rotate before cutting. 

The outside cuts of the V-Groove are exterior cuts, and cut into the matboard and not the fallout. They cut on the second pass of the V-Groove, and are cut in a counterclockwise direction.

See V-Groove Outside Rotation for information on how to adjust for this.

V-Groove Inside Rotation

The Inside Rotation field controls how much the foot block will rotate before cutting. 

The inside cuts of the V-Groove are interior cuts, and cut into the fallout and not the matboard. They cut on the first pass of the V-Groove, and are cut in a clockwise direction.

See V-Groove Inside Rotation for information on how to adjust for this.

  • No labels