">

Click here to check out our new How To section">Click here to check out our new How To section

Skip to end of banner Go to start of banner

V-Groove Inside Cut has a Flare

Skip to end of metadata

Created by dani.simmonds, last modified on Oct 10, 2024

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

V-Groove Inside Cut has a Flare

If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.

A Flare is where the corners Curve Away from the opening on the inside/outside cut of the V-Groove.
- If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.
- If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.

For Additional Information: Troubleshooting Utility for the Configurations

How to Adjust the Inside or Outside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

No labels