">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

V-Groove Inside Cut has a Swoop

  • If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

  • For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval V-Groove.

 Inside V-Groove Swoop Definition

A Swoop on the Inside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.

If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

The Inside Rotation on V-Grooves controls for Swoops or Flares/wiki/spaces/FrameShop8x/pages/1942511191on V-Grooves.

 How to Adjust the Inside or Outside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels