/
Change to the 45 Degree Front Blade Cartridge: CMC Z Series

Change to the 45 Degree Front Blade Cartridge: CMC Z Series

Owned by dani.simmonds
Last updated: May 22, 2024
1 min read

  • The 45° Front blade cartridge is labeled 45° on the end and is orange.

45 Degree Front Blade Cartridge Icon

  • Push blade cartridge release down to eject the current blade cartridge.

Push the Blade Cartridge Release Lever Down to Eject the Current Cartridge

  • Turn the new cartridge over and reinsert into the head with the blade facing the CMC board and the notch on the back of the cartridge facing the head, until it clicks into place. It can only be inserted one way.

 

Related content

CMC Model Cutting Information: CMC 8000, 9000, Z Series and Eclipse
CMC Model Cutting Information: CMC 8000, 9000, Z Series and Eclipse
Knowledge Base
Read with this
Change the 45 Degree Front Blade: CMC Z Series
Change the 45 Degree Front Blade: CMC Z Series
Knowledge Base
More like this
Change to the 45 Plus Degree Cartridge: CMC 9000, Z Series and the 8000+
Change to the 45 Plus Degree Cartridge: CMC 9000, Z Series and the 8000+
Knowledge Base
More like this
Change to the 45 Degree Cartridge: All Current CMC Models
Change to the 45 Degree Cartridge: All Current CMC Models
Knowledge Base
More like this
Change to the 90 Degree Cartridge: CMC 8500eSBT, 9000, Z Series and the 8000+
Change to the 90 Degree Cartridge: CMC 8500eSBT, 9000, Z Series and the 8000+
Knowledge Base
More like this
Change to the 52 Degree Cartridge: CMC 9000 and the Z Series
Change to the 52 Degree Cartridge: CMC 9000 and the Z Series
Knowledge Base
More like this