Inside Oval Rotation on Oval V-Grooves

Inside Oval Rotation on Oval V-Grooves
If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation. If the Inside cut of the Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation. For Additional Information: See Troubleshooting Utility for information on adjusting for a Feather or Bump in an Oval V-Groove.

Cutting Direction of V-Grooves
First Cut: Cuts the Interior cut into the Fallout Clockwise. Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Oval V-Groove Inside has a Feather

If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

For Additional Information: See Troubleshooting Utility for information on adjusting for a Feather or Bump in an Oval V-Groove.

Inside Oval V-Groove Feather Definition

A Feather in the Inside cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended on the Inside Cut of the Oval V-Groove.

If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

The Oval Rotation for V-Grooves controls for Bumps or Feathers on an Oval V-Groove.

How to Adjust the Inside Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Oval V-Groove Inside has a Bump

If the Inside cut of the Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.

For Additional Information: See Troubleshooting Utility for information on adjusting for a Feather or Bump in an Oval V-Groove.

Inside Oval V-Groove Bump Definition

A Bump in the Inside cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Inside Cut of the Oval V-Groove.

If the Inside cut of the Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.