This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Threshold

The Threshold sets the degree of detail captured from the image.  

Move the Threshold slider to the left to decrease the threshold tolerance on the image, and reduce the amount of detail captured in the design.

Move the Threshold slider to the right to increase the threshold tolerance on the image, and allow a greater amount of detail to be captured in the design.

Using the Threshold Setting

Load the image.

Move the Threshold slider to the left to reduce the detail captured in the design. 

Click the Vectorize button.

Less detail has been picked up by the software.

Move the Threshold slider to the right to allow more detail to be captured in the design. 

Click the Vectorize button.

More detail has been picked up by the software.

  • No labels