You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 4 Current »
Select which Blade Cartridge Selection to use as default when cutting from the Front.
Select Change to 45° Front Blade to use the 45° Front Cartridge by default when cutting the design from the front of the mat.
Select Use Normal 45° Blade Only to use the standard 45° Cartridge by default when cutting from the front of the mat.
Each Bevel Type, including whether cut from the Front or Back, has a designated configuration in the Current Bevel Type dropdown menu.
Be sure to select the appropriate Front/Back Bevel Type before adjusting the configurations.
Normal Bevel (Cut From Back)
Normal Bevel - Front of Mat (Cut From Front
Cut From Front: Cut From Front Toggle On: Cut Preview Options
Cut From Front Display
Cut From Front Options Menu: Cut Preview
Cut Front Tool: Always Use Normal Tool Options Menu: Cut Preview
Cut Front Tool: Switch Between Front and Normal Tools Options Menu: Cut Preview
Placing Matboard to Cut from the Front
Cut from Front: Cutting Default Setting
