">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 59 Next »

Opening Cuts too Far Right (Not Cutting the Outside)

 Horizontal Home on Openings Definition

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Left Horizontally, Increase the /wiki/spaces/FrameShop8x/pages/1942511548.

If the Opening is cut Too Far Right Horizontally, Decrease the /wiki/spaces/FrameShop8x/pages/1942511548.

 How to Adjust the Horizontal Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Opening Cuts too Far Left (Not Cutting the Outside)

 Horizontal Home on Openings Definition

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Left Horizontally, Increase the /wiki/spaces/FrameShop8x/pages/1942511548.

If the Opening is cut Too Far Right Horizontally, Decrease the /wiki/spaces/FrameShop8x/pages/1942511548.

 How to Adjust the Horizontal Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels