Outside Cut as Designed: Cut Preview Outside Cut Options

Cut the Outside As Designed: Cut Preview Outside Cut Options

Select As Designed from the Outside Cut Options dropdown control to cut the Outside as originally designed on the CMC Z1, Z (9000z), 9000 and 8000+.
- This can be helpful when coming from Trace or Nesting where you have already determined how you want the Outside to be cut.
If you have Remnant Trimming on, it will also cut off the scrap edge.

For Additional Information:
See Matboard Properties in the Design Editor to turn on/off the Outside cut.
Select Options Menu > Cut Outside on the Cut Preview to cut the outside of the mat.
See /wiki/spaces/FrameShop8x/pages/1942506497 on the Cut Preview to turn on/off the Outside cut.
See Enable Outside Cut under Advanced Outside Options on the Cut Preview to toggle on/off the Outside cut.
See Cut Outside Using 90 Degree Tool under Set Advanced Options on the Cut Preview.
See Remnant Trimming in the Set Advanced Options section on the Cut Preview.

Default Settings: As Designed Cut Mode: Cutting Default Setting

Remnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

See: Remnant Trimming Function

Search

Click here to check out our new How To section">Click here to check out our new How To section

Outside Cut as Designed: Cut Preview Outside Cut Options

Cut the Outside As Designed: Cut Preview Outside Cut Options