">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Next »

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

52 Degree Cartridge Configurations

The 52 Degree Cartridge cuts a 52° bevel into the matboard. 

Select the 52 Degree Cartridge Bevel Type

  • Select the 52° Cartridge tab.

  • Select the desired Bevel Type from the Current Bevel Type dropdown control.

  • Select the cut type from the list below.

52 Degree Opening Configurations

The 52 Degree Opening includes the following bevel types:

  • Normal Bevel

  • Reverse Bevel

  • Normal Bevel-Front of Mat

  • Reverse Bevel-Front of Mat

52 Degree Drop Configurations

The 52 Degree Drop includes the following bevel types:

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat

  • Reverse Drop-Front of Mat

52 Degree Outside Configurations

The 52 Degree Outside includes the following bevel types:

  • Outside

  • Outside-Front of Mat

52 Degree V-Groove Configurations

The 52 Degree V-Groove includes the following bevel types:

  • V-Groove

Troubleshooting Button

Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

  • No labels