">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Enhanced Templates

The Enhanced Templates available through our Webstore contain a great variety of different refined templates to add to your creativity.

These packages also contain several design examples of different treatments of the template shapes to give you an easy start toward inspiration.

 Templates Definition

Templates are specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

See: Template Properties

See: Template Library

 Mat Designs Definition

Mat Designs are complete mat designs containing openings and can contain decorative or thematic elements to be cut/applied on the CMC created in Designer and Visualization.

EnhancedTemplates800.png

Using the Enhanced Templates

  • These designs are meant to be used as the beginnings for projects.

    • Open the Template to design a project from scratch.

    • Open one of the Template’s design projects and enter the opening size to suit the current project. Change the Border widths and the Outside size to suit the current project, and the design is ready to cut.

Adjusting Number of Layers and Reveal Widths

  • You may also need to add or eliminate layers of the opening or change the Reveal widths as you would with any other template.

Making Parameter Adjustments

  • Just like the standard templates available in the FrameShop software, the Enhanced Templates each have their own parametric adjustments.

  • The parameters are specific to the individual Enhanced Template and allows you great control over the final opening, giving you complete personalized options.

  • Remember that you can hold the Alt key on the keyboard as you click the plus and minus buttons beside the parameter fields. This will change the values only 0.01 inch per click (0.2mm in metric) instead of the usual sixteenth inch per click (1mm in metric).

  • When values are small, a few hundredths of an inch can be a big change.

  • Feel free to experiment with the parameters to see the different changes you can make to each template.

  • No labels