">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

Explode CutArt

  • When a CutArt is placed, it is a single object.

  • The individual elements cannot be moved separately until the CutArt is Exploded or brought into Trace to further edit.

  • Exploding the CutArt will allow the unconnected portions to be moved separately; this will do nothing for a CutArt that is fully enclosed.

 Explode CutArt Definition

  • When a CutArt is placed, it is a single object.

  • The individual elements cannot be moved separately until the CutArt is Exploded or brought into Trace to further edit.

  • Explode the CutArt to move the separate elements of the CutArt individually.

ExplodeCutArtProcess70800.png

See: CutArt Properties

See: Trace

 Trace Definition

The Trace utility is a Vector-Based drawing graphic program for editing/creating Vectors to either Cut or apply with a Non-Blade Tool on the CMC.

See: Vector Definition

See: Trace Manual

ExplodeCutArtAfter70800.png

  • Select the desired CutArt.

  • Click Explode CutArt to break it up into the individual letters.

ExplodeCutArtBefore70800.png

  • The CutArt will be broken up into Individual Segments which can be edited separately.

ExplodeCutArtAfter70800.png

  • As an example, these segments were moved separately.

ExplodeCutArtEdited70800.png

  • No labels