">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 65 Next »

Opening Cuts too Far Right (Not Cutting the Outside)

  • If the Opening is cut Too Far Right Horizontally, Decrease the Horizontal Home.

 Horizontal Home on Openings Definition

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Left Horizontally, Increase the Horizontal Home.

If the Opening is cut Too Far Right Horizontally, Decrease the Horizontal Home.

 How to Adjust the Horizontal Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Opening Cuts too Far Left (Not Cutting the Outside)

  • If the Opening is cut Too Far Left Horizontally, Increase the Horizontal Home.

 Horizontal Home on Openings Definition

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Left Horizontally, Increase the Horizontal Home.

If the Opening is cut Too Far Right Horizontally, Decrease the Horizontal Home.

 How to Adjust the Horizontal Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels