You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 9 Current »
If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.
🛠️ Click the Plus or Minus button several times on the desired field, do a test cut and continue adjusting until satisfied.
A Flare is where the corners Curve Away from the opening on the inside/outside cut of the V-Groove.
If V-Groove Outside has a Flare, Increase the Outside Rotation.
If V-Groove Inside has a Flare, Decrease the Inside Rotation.
Full Definition: Flare on V-Groove Definition
For Additional Information: Troubleshooting Utility for the Configurations
