">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 4 Next »

  • Some cartridges are available only in specific circumstances.

  • The 45°+ Cartridge is not selectable from the New Opening Screen or the Design screen.

    • The 45°+ Cartridge is selected on the Cut Preview Screen by selecting a Blade Depth above 16.

  • The 45° Front Cartridge is not selectable from the New Opening Screen or the Design screen.

    • The 45° Front Cartridge is selected on the Cut Preview Screen by selecting Options > Cut From Front Tool > Switch Between Front and Normal Tools and selecting to Cut From the Front of the mat.

  • The Non-Blade Cartridges (Deboss/Pen/Vinyl/Crease) are not selectable from the New Opening Screen or the Properties Tab on the Design screen for Templates.

    • You must first place the Non-Blade Cartridge object (Deboss/Pen/Vinyl/Crease) from the Openings Tab > Add Decorative Line then go to Properties Tab > Options to select the Template shape.

45PlusMetalBevelOpeningCartridge70800.png45FrontMetalBevelOpeningCartridge70800.pngDebossingPenCartridgesVinyl70800.png
  • No labels