Cut the Outside Toggle |
|---|
Use the Cut the Outside toggle to select cutting or not cutting the outside of the mat on the non-CMC 9000z. For the outside cut options for the 9000z, see Outside Cut Options. |
Cut the Outside OnClick the Cut Outside toggle On to cut the outside of the mat. | |
|---|---|
Click the Cut Outside toggle On to cut the outside of the mat. The outside of the mat will be cut. |  |
Cut the Outside OffClick the Cut Outside toggle Off to not cut the outside of the mat. | |
|---|---|
lick the Cut Outside toggle Off to not cut the outside of the mat. The outside of the mat will not be cut. |  |
Set the Default for Cutting the Outside | |
|---|---|
The default setting for Cutting the Outside can be set in the Admin > Editor section. |  |
Set the Default for 90 Degree Outside Cut | |
|---|---|
The default setting for 90 Degree Outside can be set in the Admin > Cutting section. |  |
Rail DodgeIf your borders are less than 1.5" and you are not not cutting the outside, you will need to either select to Cut the Outside, or use a Rail Dodge. | |
|---|---|
If your borders are less than 1.5" and you are not not cutting the outside, you will need to either select to Cut the Outside, or use a Rail Dodge. Click Save. |  |
Set the Default for the Rail Dodge | |
|---|---|
The default setting for the Rail Dodge can be set in the Admin > Cutting section. |  |