Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Cut the Outside Toggle

Use the Cut the Outside toggle to select cutting or not cutting the outside of the mat on the non-CMC 9000z.  

For the outside cut options for the 9000z, see Outside Cut Options.

Cut the Outside On 

Click the Cut Outside toggle On to cut the outside of the mat. 

Click the Cut Outside toggle On to cut the outside of the mat.

The outside of the mat will be cut. 

Cut the Outside Off

Click the Cut Outside toggle Off to not cut the outside of the mat.

lick the Cut Outside toggle Off to not cut the outside of the mat.

The outside of the mat will not be cut.

Set the Default for Cutting the Outside 

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Set the Default for 90 Degree Outside Cut

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

Rail Dodge

If your borders are less than 1.5" and you are not not cutting the outside, you will need to either select to Cut the Outside, or use a Rail Dodge. 

If your borders are less than 1.5" and you are not not cutting the outside, you will need to either select to Cut the Outside, or use a Rail Dodge.

Click Save.

Set the Default for the Rail Dodge

The default setting for the Rail Dodge can be set in the Admin > Cutting section.

  • No labels