This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

Set Advanced Options

Use the Set Advanced Options to select several setting that dictate how the outside of the mat is cut on the CMC 9000z and Z1. 

Set Advanced Options

Click the Set Advanced Options button to access the Set Outside Cut Options screen.

Enable Outside Cut

Select this topic to see information on setting for Cutting the Outside of the Mat.

Cut Outside Using 90 Degree Tool

Select this topic to see information on settings for Cutting the Outside of the Mat Using the 90 Degree Tool.

Cut Mode

Select this topic to see information on setting the Cut Mode for cutting the outside of the mat.

Cut Pattern

Select this topic to see information on setting the Cut Pattern for cutting tiled mats.

Remnant Trimming

Select this topic to see information on setting whether to use Remnant Trimming when cutting the outside of the mat.

  • No labels