You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 2 Next »
If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.
For Additional Information: Troubleshooting Utility for the Configurations
A Swoop in the Outside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.
The Rotation on V-Grooves controls for Swoops or Flares on V-Grooves.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
