Measuring the Blade Depth: CMC Z1

Owned by dani.simmonds
Last updated: Jun 05, 2024
5 min read

Measuring the Blade Depth: CMC Z1

Measuring the Blade Depth: CMC Z1

  • We will measure the blade depth to determine what the default blade depth should be for your standard matboard. Because the CMC model Z1 completely controls the blade depth within the software, it does not have a blade depth knob.

  • Open FrameShop and design a 2x2 opening mat.

  • Go to the Cut Preview and cut the mat using your standard matboard.

  • Look at the mat. Did the blade cut all the way through the matboard? Or did it cut all the way into the backing mat?

2x2 Opening

  • If an adjustment needs to be made, click on the Blade Depth Button on the Cut Preview.

Click the Blade Depth Button

Cutting Too Deep

Cutting Too Deep

Cutting Too Shallow

Cutting Too Shallow

Setting the Default Blade Depth

Setting the Default Blade Depth

Blade Depth Adjustment

Blade Depth Adjustment

Measuring Blade Depth for V-Grooves

Measuring Blade Depth for V-Grooves

V-Groove Cutting Too Deep

V-Groove Cutting Too Deep

V-Groove Cutting Too Shallow

V-Groove Cutting Too Shallow

Setting the Default V-Groove Blade Depth

Setting the Default V-Groove Blade Depth