/
Changing the Blade: All Current CMC Models

Changing the Blade: All Current CMC Models

Owned by dani.simmonds
Last updated: May 22, 2024
1 min read

  • The Changing the Blade section gives information on changing the blades for the CMC cartridges.

  • If there is any side-to-side movement of the blade in the blade cartridge, or if chunks have been cut out of the blade cartridge, then it is time to replace the blade cartridge.

Contents:

45° Cartridge and Sample Cut

 

Related content

Maintenance Recommended for the CMC: All Current CMC Models
Maintenance Recommended for the CMC: All Current CMC Models
Knowledge Base
Read with this
Changing the Cartridges: All Current CMC Models
Changing the Cartridges: All Current CMC Models
Knowledge Base
More like this
Changing the Blade on the 45 Degree Cartridge: CMC Z1, Z (9000z), 9000, 8500e SBT, 8500e, 8500 and 8000
Changing the Blade on the 45 Degree Cartridge: CMC Z1, Z (9000z), 9000, 8500e SBT, 8500e, 8500 and 8000
FrameShop 4x
More like this
Change to the 45 Degree Cartridge: All Current CMC Models
Change to the 45 Degree Cartridge: All Current CMC Models
Knowledge Base
More like this
Change the 45 Degree Blade: All Current CMC Models
Change the 45 Degree Blade: All Current CMC Models
Knowledge Base
More like this
Changing to the 45 Degree Blade Cartridge: CMC Z1, Z (9000z), 9000, 8500e SBT, 8500e, 8500 and 8000
Changing to the 45 Degree Blade Cartridge: CMC Z1, Z (9000z), 9000, 8500e SBT, 8500e, 8500 and 8000
FrameShop 4x
More like this