Letter Height: Editor Default Setting
Letter Height: Editor Default Setting | |
---|---|
Contents:
The LetterMat™ fonts are specialized fonts designed specifically for the Wizard FrameShop software. Single Line Fonts: The letters are formed with Single Lines, not drawn as the outlines of shapes. Single line fonts can only be Debossed or drawn with the Pen. Outline Fonts: The Outline fonts display the shapes of the letters as outlines with only a slight distinction between the thin and thick strokes. These fonts can be Debossed, Penned or Cut. LetterMat Example See: Add Font Function See: LetterMat Properties The True Type Font (TTF) is an additional source of fonts, separate from LetterMats, that can be loaded into the Design Editor to Cut, Deboss, or Pen. The True Type Font (TTF) format was created to work between both Apple (Mac) and Microsoft (Windows) and could be deciphered by most printers by default. The TTFs contain the mathematical outlines of each character in the font. The True Type Fonts are located in the /Windows/Fonts directory. Note: TTFs have not been tested by Wizard and results may vary. Feel free to experiment. True Type Fonts Reside in the C:/Windows/Fonts Directory See: Add Font Function See: TTF Properties Min Height displays the Minimum Height that the selected CutArt or LetterMat has been tested to cut. The CutArt/LetterMat can be Debossed or Penned at a much smaller size than it can be cut. See: CutArt Properties See: LetterMat Properties |
|