Stairstep Cut Pattern

Cut Pattern: Stairstep

Cut Pattern: Stairstep
Set Stairstep from the Cut Pattern dropdown control to cut tiled mats in a Stairstep Pattern on the CMC Z1, Z(9000z), 9000 and 8000+. Click the Set Advanced Options button to access the Advanced Outside Options. For Additional Information: Select Options Menu > Cut Outside to cut the outside of the mat. See Cut the Outside to turn on/off the Outside cut. See Advanced Outside Options: Enable Outside Cut to turn on/off the Outside cut. Default Settings: See Admin > Editor for the default settings for Cutting the Outside. See Admin > Cutting for the default settings for the Advanced Options. See Admin > Cutting for the default settings for the Cut Mode. See Admin > Cutting for the default settings for 90 Degree Outside. See Admin > Cutting for the default settings for Tiling. See Admin > Cutting for the default size for the Spacing between designs.	Click the Set Advanced Options Button to Access the Advanced Outside Options
Select Stairstep from the Cut Pattern dropdown control. Click OK.	Select Stairstep from the Cut Pattern Dropdown Control to Cut in a Stairstep Pattern
The Outside of Tiled mats will cut in a Stairstep Pattern, starting in the Upper Right and work its way down to the Lower Left in a Stairstep Pattern. For Additional Information: See Stairstep vs. Optimized vs. Unidirectional for information on the outside cutting differences between the different Cut Patterns.	The Outside of Tiled Mats Will Cut in a Stairstep Pattern

Search

Stairstep Cut Pattern

Cut Pattern: Stairstep

Cut Pattern: Stairstep