This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Load File Image: FrameShop Visualize Editor

Load File Image

Load File Image

These instructions show how to load a file image into the software.

Click the Load File Image button to load an image from a file.

The Open File screen opens.

Click on the desired image file.

Click Open to open the image. The file is opened into the Editor.

Pixels Per Unit

If the image file loaded is a different size than the last file loaded, it will ask you to set the scale using Pixels per the current unit of measurement for the image. If you are using inches, it will be Pixels per Inch.

Enter the number of Pixels per Inch and click OK.

Optionally, click the Set as Default checkbox to set this size as the default size.

How to Calculate PPI2 or Pixels per Square Inch.

Multiply PPI × PPI to get pixels per square inch. The number of pixels in a square inch represents the resolution or pixel density of an area of one square inch. Substitute 1 cm for 1 inch to find pixels per square centimeter or PPcm2.