This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Fan Openings: FrameShop Design Editor
Fan Openings | |
---|---|
Use the Fan buttons to rotate and fan out the objects around a pivot point. | |
The Fan Openings section is used to rotate and fan out a selection of objects around a pivot point. |
Fan Direction | |
---|---|
Openings can be fanned horizontally or vertically. Select the desired openings. Enter the desired fan distance in the field next to the appropriate fan direction. Click Set Fan. |
Fan Distance | |
---|---|
Fan Distance is the height of the fan from the center of the end objects. Positive value fans the objects upwards; negative value fans the objects downward.    The Fan can also be adjusted by clicking and moving the center handle of the fan with the mouse. If the fan is unselected (i.e., the mouse is clicked elsewhere on the design), reselect the objects and click Set Fan to reselect the fan function to continue editing it. |